This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer
Headshell Modell | A Headshell length | B Mounting Distance max. | C Mounting Distance min. | D Headshell width | E |
|
| AT-HS1 | 51,8 mm | 47,3 mm | 36,9 mm | 20,8 mm | 8 mm | 10,1 g |
| AT-HS3 | ||||||
| AT-HS6 | 48,9 mm | 47 mm | 36,4 mm | 21,3 mm | 8 mm | 9,3 g |
| AT-HS10 | 50,8 mm | 47,3 mm | 36,8 mm | 20,8 mm | 8 mm | 10,0 g |
| AT-LH 11 H | 41,7 mm | 35,0 mm - 44,0 mm | 31,5 mm - 40,5 mm | 17 mm | 8 mm | 11,5 g |
| AT-LH 13 H | 41,7 mm | 35,0 mm - 44,0 mm | 31,5 mm - 40,5 mm | 17 mm | 8 mm | 14,2 g |
| AT-LH 15 H | 45,2 mm | 38,5 mm - 47,5 mm | 35,0 mm - 44,0 mm | 17 mm | 8 mm | 15,6 g |
| AT-LH 18 H | 45,2 mm | 38,5 mm - 47,5 mm | 35,0 mm - 44,0 mm | 17 mm | 8 mm | 19,3 g |
| AT-LH13 | 38,5 mm | 34,6 mm - 42,5 mm | 27,2 mm - 35,1 mm | 17 mm | 8 mm | 14 g |
| AT-LH15 | 43 mm | 37,6 mm - 46,6 mm | 31,6 mm - 40,6 mm | 17 mm | 8 mm | 15,5 g |
| AT-LH18 | 43 mm | 38 mm - 46,6 mm | 31,9 mm - 40,6 mm | 17 mm | 8 mm | 19,4 g |
| AT-MG10 | 50,5 mm | 45,1 mm | 31,7 mm | 17,2 mm | 8 mm | 9,3 g |
| AT-S | 56,6 mm | 48 mm | 33,8 mm | 18,3 mm | 8 mm | 7,2 g |