Audio Technica
Audio Technica AT-VM95SH/H Moving Magnet Cartridge incl. AT-HS6 Headshell
Item-ID: 9547
We will gladly inform you as soon as the article is available again.
I hereby confirm that I have read the Privacy policy.*VM95 series Shibata stereo cartridge on AT-HS6 Headshell
- AT-VM95SH mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Shibata Stylus
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.
Preassembled With AT-HS6BK Headshell
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell
Type | VM Dual Magnet |
Mounting | Half-inch |
Frequency Response | 20 - 25,000 Hz |
Channel Separation | 23 dB at 1kHz |
Output Channel Balance | 1.5dB |
Output Voltage | 3.5 mV (mV at 1 kHz, 5 cm/sec) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 - 2.2g |
Stylus Shape | Shibata |
Stylus Size | 2.7 x 0.26 mil |
Stylus Construction | Nude Square Shank |
Cantilever | Aluminium Pipe |
Coil Inductance | 550mH (1 kHz) |
Static Compliance | 20 x 10-6 cm/dyne |
Dynamic Compliance | 10.0x10-6cm/dyne (100Hz) |
Recommended Load Impedance | 47,000 ohms |
Recommended Load Capacitance | 100-200 pF |
Weight | 15.5g |
Dimensions | H21.2×W21.4×D62.4mm |
Replacement Stylus | AT-VMN95SH |
*required