Audio Technica
Audio Technica AT-VM95SP/H Moving Magnet Cartridge incl. AT-HS6 Headshell
Item-ID: 9548
We will gladly inform you as soon as the article is available again.
I hereby confirm that I have read the Privacy policy.*VM95 series 78rpm SP cartridge on AT-HS6 Headshell
- AT-VM95SP mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Conical Bonded (3mil) Stylus
A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.
Preassembled With AT-HS6BK Headshell
The AT-VM95SP cartridge is fitted onto the 9g aluminiumdie cast body headshell
| Type | VM Dual Magnet |
| Mounting | Half-inch |
| Frequency Response | 20 - 20,000 Hz |
| Channel Separation | NA |
| Output Channel Balance | 1.5dB |
| Output Voltage | 2.7 mV (mV at 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force Range | 4.5 - 5.5g |
| Stylus Shape | Conical |
| Stylus Size | 3.0 mil |
| Stylus Construction | Bonded Round Shank |
| Cantilever | Aluminium Pipe |
| Coil Inductance | 550mH (1 kHz) |
| Static Compliance | 12 x 10-6 cm/dyne |
| Dynamic Compliance | 2.0x10-6cm/dyne (100Hz) |
| Recommended Load Impedance | 47,000 ohms |
| Recommended Load Capacitance | 100-200 pF |
| Weight | 15.5g |
| Dimensions | H21.2×W21.4×D62,4mm |
| Replacement Stylus | AT-VMN95SP |
*required
Other customers also bought