Goldring E4 Cartridge - B-Stock

Goldring E4 Cartridge - a design that is compatible with all medium to high-mass tonearms. Its construction is based on high-quality core similar to the E Series cartridges in this range. Essentially, the cartridge is ideal for upgrading the entirety of an obsolete cartridge. Particularly, the E4 is designed to boost the performance of the existing E Series cartridge by replacing the stylus. New super-elliptical nude diamond stylus The E4 comes with a ‘nude’ super-elliptical stylus of 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond, resulting to a lower effective tip mass of improved rigidity. In turn, this means its ability to retrieve high-frequency detail is significantly improved in comparison to the ‘bonded’ elliptical stylus alternative. It is highly unlikely to ‘mis-track’ or overshoot when tracing high-frequency groove modulations. With its finely polished 7.6-micron profile, it can effectively fit into closely packed inner grooves. Additionally, lower distortion, improved transient response and a flat frequency response are contributing factors that make E4 a superior fidelity when compared to any alternative.

B-Stock:

Returns, slight signs of wear due to packing and unpacking possible. With full guarantee, invoice with stated VAT from the authorized German Goldring dealer. The article will be delivered in the original packaging, the outer and / or inner box may show signs of use and / or damage.

Goldring E4 Cartridge - a design that is compatible with all medium to high-mass tonearms. Its construction is based on high-quality core similar to the E Series cartridges in this range. Essentially, the cartridge is ideal for upgrading the entirety of an obsolete cartridge. Particularly, the E4 is designed to boost the performance of the existing E Series cartridge by replacing the stylus.

New super-elliptical nude diamond stylus
The E4 comes with a ‘nude’ super-elliptical stylus of 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond, resulting to a lower effective tip mass of improved rigidity. In turn, this means its ability to retrieve high-frequency detail is significantly improved in comparison to the ‘bonded’ elliptical stylus alternative.

It is highly unlikely to ‘mis-track’ or overshoot when tracing high-frequency groove modulations. With its finely polished 7.6-micron profile, it can effectively fit into closely packed inner grooves. Additionally, lower distortion, improved transient response and a flat frequency response are contributing factors that make E4 a superior fidelity when compared to any alternative.

Product safety information

Manufacturer:

Contact: Email:

EU-Responsible Person:

Contact:

Colour: Blue
Stylus carrier: Aluminium
Stylus grind: naked elliptical
Stylus radius: 0.3 x 0.7 mil
Frequency range: 20 Hz - 20 kHz
Channel uniformity: <1.5 dB at 1 kHz
Channel separation: >20 dB at 1 kHz
Output voltage: 3.5 mV (1 kHz @ 5 cm/sec)
Needle compliance: 20 mm/N
Vertical tracking angle: 20
Load resistance: 47 kΩ
Capacitive load: 100 - 200 pF
Coil inductance: 400 mH
Coil impedance: 410 Ω
Weight: 6.9 g
Mounting hole spacing: 12.7 mm (0.5'')
Tracking force: 1.5 g - 2.5 g (recommended: 1.75 g)